Search results

Just checking to see if anyone has any experience with Varget in the 425WR? Thank you

As new, was mounted and shot only 6 times. $100 shipped USPS flat rate.

Brand new in box, $105 shipped

Like new optic, clean glass, this has the 1” tube and A7 reticle. $1250 shipped.

Does anyone have load data for the 425WR using H4350 ? Thank you !

I just received an order of .435 caliber bullets by Hammer. After measuring a few I’m finding that they are .4350” diameter. I was hoping they would measure .4345” … now I’m a bit concerned about shooting them. My 425 WR was made in 1990 so not an old rifle… any thoughts on this ?

Looking for some 8x68s brass. If anyone has any to spare please DM me. Thank you in advance.

7/8” wide Bridle leather with a green suede backing, very well made machined 1” steel sling swivels, brass stud tab keepers, 39.5” overall. New and never used. A superb sling. $125 shipped

This is a brand new set of rings and bases to fit a ‘98 type action. THESE RINGS ARE FOR A 26mm SCOPE TUBE. I ordered an extra set by mistake. Extension front ring is 10mm and ring height is 17mm (basically is a standard length “tall” low or “short” medium height mount which should accommodate a...

23.5” bbl, 14” LOP, excellent overall condition (but has a small rough spot on the buttstock near the toe and a small scratch on the cheek piece). I never shot this rifle but the previous owner said it was very accurate (more so than his model 70). Has a set of Weaver type scope bases on it now...

Unsure if this is the original finish but all indications lead me to believe it is- still a plain Jane 12 bore, full choke, 30” bbl. Made in the mid-50’s if I remember correctly. Recoil pad is not original, LOP is 14.75” to end of pad. $600 shipped.

70 pieces in all, got it for a project but went a different direction. $80 shipped or can bring to DSC or SCI for $70.

Bruce Farman is a master stocker and builder. Notice the detailed checkering and wood to metal fit. I even ran across an original WR&Co front sight…

PacNor did the barrel, Bruce Farman did the metal work and the stock, and Dennis Olson did the safety and feeding work.

LOP is 14.0” , weight is 8 lb 12 oz, barrel is 24.5” to end of muzzle break (I’ve not tried to take it off but looks removable). Numbers on action and bottom metal match. Military safety converted to 2 position wing safety (flawless and not sloppy). One spot of missing bluing and one small place...

Excellent condition, measures to 0.001”. $50 shipped.

Picked this up as a project rifle but just too nice to take apart and I never fired this one either. Matching numbered barrel, action, and bolt. Looked to have a receiver side mount at one time but very difficult to tell on the outside. 9.3x57 ammo is around but I do not have any. $775 shipped.

Excellent condition, model 505-637-50. $55 shipped. **white “spot” on dial in second photo is a light reflection**

I bought this rifle about 8 years ago with the intension of pulling apart for a project. I couldn’t bring myself to do that since it was so nice. I never fired this rifle so I can’t attest to accuracy. It’s been opened up to Ackley Improved and the stock was refinished. LOP is 13.75”, 13.3”...

Original rifle was a 30/06 and was rebored at some point to 30/06 Ackley Improved and the stock redone in a satin finish. Stock is in outstanding condition. No salt issues in ‘65. LOP to this pad on it now is 13.35” to center and 13.75” at top and bottom. Original bottom metal is very good plus...

All Measurements are for overall BELL diameter $3 each 1. 52/44 mm, for 13”+ length scope 2. 40/40 mm, 10.5”+ 3. 40/40 mm, 10.5”+ 4. 42/40 mm, 10.5”+ 5. 52/42 mm, 10.5”+ 6. 54/44 mm, 12”+ $3 each 7. 57/48 mm, fits 13”+ length scope 8. 46/41 mm, 9.5”+ 9. 42/38 mm, 11.5”+ 10. 58/44 mm...

I have 1 box of A Frames, 500 gr . $100 shipped CONUS if anyone can use them.

20 pieces of new Jamison brass. $155 shipped small box USPS flat rate conus.

I can’t find any info on these. I’d appreciate any help with this.

1 extra box of these, great for cats. $85 shipped.

1 Extra box of these , $85 shipped.

I have 1 extra box if someone can use them. $110 shipped CONUS.

Good for practicing with. Both boxes (100 bullets total) for $150 shipped

Looking for the old Hornady soft nose .458 bullets , 500 gr Thank you for any and all help.

I bought this to convert to 318 WR but now have tons of 318WR head stamped brass. No need to keep it. $130 shipped

25” barrel WS-1 choke, 14” LOP, serial number indicates 1960 manufacture, round post “Winchester special vent rib” apparently only done for a couple of years, excellent plus condition. I’ll be glad to provide more photos or video if needed. $1035 shipped to your FFL.

For a standard Mauser 98, Upgraded wood, 2 crossbolts, cheek piece, kick-ez pad, LOP approximately 13.5” with 1/2” pad. Brand new in the box. $390 shipped.

As stated , looking for a mount to fit on a CZ550. Also interested in an SRO for sale. Thank you for any and all help.

What brass maker is this ?? BCCC ??

I have 2 Mausers with this “A.N.” Designation at the end of the identification wording. What does this mean or stand for ?

I’m looking to see if anyone has the above bottom metal they don’t need before calling Swift. This is listed as the 416 Rem Mag extra deep for Mauser actions. Thank you in advance for any help.

Just trying to get some info - thanks all !

I shot the 458 African for the first time Friday. It’s fitted in a try-stock just for testing to see if it’s worthy of completion. After initial bore sighting and firing for scope set up, I was able to settle down with the ill fitting stock and shoot this 5 shot group at 100 yards. My load was a...

I’m trying to find an excellent condition Ultra XS in 20 ga. Thank you all available help. Hoping someone here will have one to part with!

No idea what it fits but if you cover postage ($10 flat rate) I will send it to you. It has a standard bolt face.

For optic approximately 12.5” long, fits outside housing diameters of 56mm and 43mm. Very good condition, $25 shipped.

For optic approximately 13.5” long, for outside bell housings of 56mm and 43mm. Very good condition, $25 shipped.

Swarovski brand, fits optics appropriately 12.5” in length, for bell housing outside diameters or 48mm and 43mm. Good condition, $25 shipped.

Length fits approximately 13.25” optic, Fits Objective outside diameter of 62 mm and Ocular outside diameter of 43 mm. Very good condition overall. $25 shipped.

Brand new edition, signed by the author. $250 shipped. I have 2 left if anyone wants this for a special edition to your library.

New box of Bertram brass , 20 count, $90 shipped CONUS

Inside diameter of objective cover is 48mm, ocular 40mm, excellent condition. Total length tethered is 12.5” so I’d say scope length shouldn’t exceed 11-11.5” (?). $45 shipped

3 boxes (60 total pieces) of new 318 WR brass by Bertram. $250 shipped

One box of new Bertram 450#2 brass , qty 20. $145 shipped in USPS flat rate box.

Two full boxes of 250 gr RNSN for the 318WR, 100 bullets total. $250 shipped CONUS.