Search results

Neck sizing die and seater die. They didn’t have the full length sizer available so used neck sizer to help forming process. $120 shipped to your door

New unfired, unprimed 35 Whelen Norma brass. Bought for a project that never moved forward. $65 shipped in lower 48, box not included.

50 new Norma 416 Rem Mag cases unfired, unprimed. $90 shipped in lower 48. Box not included

Brand new in box…used the seater to load 4 dummies to send to gunsmith. $160 shipped to your door in lower 48

Cleaning out the ammo bin. 1 full box and one box with 7rds fired…total of 33rds. 400gr Nosler Partitions. Everything shipped lower 48 where legal for $220.

Was cleaning out my gun safe and realized I have too many projects going on and thought there was a lefty out there that might put this to good use. Stock work is by Al Lind in Washington State from a Luxus Turkish Walnut blank. It has wrap around checkering with a slight left hand palm swell...

Have had this sitting around as a backup that I have never mounted. Illuminated model with illuminated dot #60 reticle. Glass is perfect and everything works as it should. $850 shipped to your door in lower 48

Cleaning off the loading bench and found 4 boxes of 260gr Accubonds I don’t need. All are new and unopened…one box has a small split on the side likely from weight but has not been opened. 2 - boxes for $150 or all 4 for $280. Prices include shipping to your door in lower 48.

Have had this on a backup rifle that I am selling. Was mounted but never left the gun safe. Not a scratch or ring mark on it and looks almost new. Has the BRH reticle which corresponds with their ballistic app. Has original box, scope covers, all paperwork, and reticle stickers. $1700...

1 full box of Federal 260gr Accubond - $130 shipped lower 48 1 full box of 300gr Nosler Partition - $120 shipped lower 48 14rds Barnes 300gr TSX - $50 shipped lower 48 $275 shipped for all of it. E payments or money order/check hold til cleared.

Hate to let this one go but not moving forward with the project I got it for and want to see somebody enjoy it. Blank was ordered from Roger in January of 23 and shipped from Australia. His wood is used by a lot of fine gun makers and pictures don’t do this justice. I tried to get pictures in...

Pulled this off my 375 I am selling. Purchased new Jan 2023. Mounted it and never fired. Comes with all the original paperwork/manuals/scope covers/box/etc. Had it mounted in Talley QR rings and has a scuff from the ring on the top rear section as well as underneath…all shown in the pictures...

Cleaning out my parts bin…have following items for sale. All bottom metal is for Winchester Model 70 New Haven guns. 1-3 are for long action/magnum length and 4 is for short WSM length. 1. Sunny Hill Model 770 specifically for RUM/404 based rounds. Wider at front to spread rounds out and...

Continuing clean out of loading room. Brand new never used Redding 2 die set for 450 Rigby - $230 shipped in Lower 48 100 pcs Brand new unprimed Norma 450 Rigby brass. They came out of the package and went straight into this box. Will ship in the ammo box - $415 for all 100 shipped in Lower...

Cleaning out the ammo room. Have a bunch of 450 Rigby ammo for a project I never moved forward with. 8 - 10rd boxes of Nosler 500gr Partitions 1 - 10rd box of Norma 500gr Solids All full boxes. Prefer to sell in 40rd minimums. $100 per 10rd sleeve, or $850 for all 90rds. Will quote...

3 full unopened boxes 326gr Shock Hammers 50 bullets per box $250 for all three shipped to lower 48 I bought these for a 400 Whelen project that I never moved forward with.

Have had these sitting aside for projects that won’t happen anytime soon. Krieger 358 barrel Number 4 contour Chromoly steel 1.25 breech diameter 12 twist 0.670 muzzle at 26” finish Blank is 27” long $415 shipped to lower 48 Brux 458 barrel Number 5 contour Chromoly steel 1.25 breech...

This one stings to let go of but it’s not getting any use and needs a good home. Left Hand CRF New Haven Winchester M70 23.5” Brux Stainless 1 in 12 twist barrel #5 contour NECG adjustable rear sight and masterpiece banded front sight with red bead Talley bases opened to 8-40 screw holes...

I took this in trade from a friend a while back and figured somebody that wanted a 404 might get some use out of it. Would call it 95-98% Right handed New Haven Classic Sporter CRF barreled action. Factory chambered in 300 Remington Ultra Mag. If you look at the underside of the action is has...

Bought this for a project that I am not moving forward with…would rather see somebody get some use out of it. Like new condition and not a scratch on it. 30mm tube, with box, paperwork, and factory scope covers. $2650 shipped to your door in lower 48. Located in Houston, TX if anyone wants...

I have one full 20 round box of factory loaded DoubleTap DT Safari 458 Lott loaded with 550gr Woodleigh FMJ’s. Box says 2190fps out of their 25” test barrel. $150 shipped to your door in lower 48.

Have had this sitting in my gun safe and can’t find a gun to put it on. Brand new…no ring marks and not a scratch on it. Will toss a set of low 1” Talley fixed rings in with it. $265 shipped to your door in lower 48

Cleaning out my reloading room and have these for sale. Bought them to set up a few dummy rounds for a project rifle and never moved forward with it. Still new in box as they came from retailer. $100 to your door in Lower 48

Looking for a lefty Model 70 Classic in any of the WSM chamberings for a donor rifle for a project. Let me know what anyone may have available. Not as concerned about condition or round count, only that action hasnt been altered and was originally factory chambered in one of the WSMs. Since...

Bought this from Krieger’s In-Stock inventory January of this year and had them turn it to their #5 contour with the intention of building a 400 Whelen. Decided to go a different direction and going to let it go to fund other projects. Krieger 411/403 Chromoly barrel blank 16 twist #5 contour...

Cleaning out my parts bin and found this NECG rear sight. Brand new and never mounted. XL size for 0.830”-0.930” barrel. $150 shipped to lower 48

Got this as part of a package deal on a rifle and keep saying I am going to mount it on something but haven’t done it. Would rather see somebody get some use out of it. This is the duplex reticle…NOT heavy duplex. Matte finish. Glass is perfect, there are the faintest of ring marks but...

I need 4-5 Barnes 350gr TTSX to make up some dummy rounds for throating/feed/function. If anybody has some to spare I will pay a few bucks per bullet plus shipping. Let me know if anyone has a few to spare.

Anybody have a Post 64 Williams Bottom metal laying around? Looking for one for a project and stock is already inlet for it.

I finally got my hands on a reasonably priced lefty Dakota 76 African action in the white with a Rigby bolt face and am in the early stages of planning a custom. For righties, magnum length actions are easy to come by but for a lefty we have very few options for Rigby length CRF variants...

Does anybody have any Norma 450 Rigby brass laying around they would like to part with?

Lead times are nuts so figured I would ask here... Looking for a chromoly 458 barrel blank if somebody has one laying around. Prefer Krieger, Bartlein, Brux but open to listening. Prefer contour similar to a Krieger #6 at 23-25" finish length 14 twist, but 12 would work.

I am going to regret this but other hobbies need the cash. I bought this for a project rifle that never happened and figured somebody could get more use out of it than me. It is the Non-Illuminated Z6 model with the circle dot reticle. New in box and never mounted on a rifle. Has all...

I have nine full boxes of Barnes 570gr TSX bullets with 20 bullets per box…also one additional box with 13 bullets. I have these left over from my 500 A-Square and only used a few to make up dummy rounds. $400 shipped to lower 48 for all 193 bullets

I am going to regret this but other hobbies need the cash. I bought 4 of these in for project rifles and have used 2 of them. These two have been sitting in the safe and are new in box, and never mounted. Have all paperwork and original see through scope covers along with boxes. Both are the...

Hate to let this go but looks like Africa is farther off than originally anticipated. Acquired a Left Hand CZ550 magnum action in 375H&H and sent it to Wayne at AHR in 2019. For a lefty this used to be one of the easiest routes to a true magnum length CRF action until CZ stopped making them...

I bought this about 6 months ago and with the other projects I have going on it has unfortunately just sat in the safe. Going to reluctantly let it go to free up funds to finance other projects Dakota 76 Left Hand African Chambered in 450 Dakota Barrel measures 23.5" from the action face...

Have just finished up my 375 RUM build the way the cartridge should have been originally introduced. As a lefty I am a bit limited but was able to find a LH M70 CRF in 300 Win and have my smith convert it. Ended up with a #6 Krieger barrel finished at 24” with Sunny Hill bottom metal and...