Search results

Here is the stock blank for the 6.5X65R barreled action. Well selected by the customer. Should turn a stunner of a stock. I won't be stocking it. That will be done by Aaron Little. Very talented and will do a fantastic job.

Here is the stock blank for the 6.5X65R barreled action. Well selected by the customer. Should turn a stunner of a stock. I won't be stocking it. That will be done by Aaron Little. Very talented and will do a fantastic job.

Functional demonstration of the action. Primed case, ignites the primer and extracts effectively

The action is barreled with a Brux 6.5 chrome molly, chambered in 6.5X65R. It's fully funtional and ready for stocking.

The action is barreled with a Brux 6.5 chrome molly, chambered in 6.5X65R. It's fully funtional and ready for stocking.

The action is barreled with a Brux 6.5 chrome molly, chambered in 6.5X65R. It's fully funtional and ready for stocking.

The action is barreled with a Brux 6.5 chrome molly, chambered in 6.5X65R. It's fully funtional and ready for stocking.

The action is barreled with a Brux 6.5 chrome molly, chambered in 6.5X65R. It's fully funtional and ready for stocking.

Here is the stock blank for the 6.5X65R barreled action. Well selected by the customer. Should turn a stunner of a stock. I won't be stocking it. That will be done by Aaron Little. Very talented and will do a fantastic job.

The action is barreled with a Brux 6.5 chrome molly, chambered in 6.5X65R. It's fully funtional and ready for stocking.

I can easily make one with a left handed lever. Will be starting another batch in two weeks. Just say the word....

Yes, S7 is what I use for the internals

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut selected.

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut selected.

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut selected.

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut selected.

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut selected.

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut selected.

This one is 99% finished. Amazing what a good polish will do. Fully functional and ready to barrel. It will wear a Brux barrel and be chambered for the 6.5x65R cartridge. Very comparable to the 6.5-06 but with a rim. It also has an incredibly beautiful stock blank of curly Turkish walnut...

Let the polishing begin. Start with files where needed, then stone from 220 to 400 and move to paper up to 400. A little wd-40 for lubricant.

Let the polishing begin. Start with files where needed, then stone from 220 to 400 and move to paper up to 400. A little wd-40 for lubricant.

Let the polishing begin. Start with files where needed, then stone from 220 to 400 and move to paper up to 400. A little wd-40 for lubricant.

Let the polishing begin. Start with files where needed, then stone from 220 to 400 and move to paper up to 400. A little wd-40 for lubricant.

Let the polishing begin. Start with files where needed, then stone from 220 to 400 and move to paper up to 400. A little wd-40 for lubricant.

I will give a detailed overview of the internal components when I harden and polish them. The striker is installed and works great. FAR better than a traditional hammer/ transfer bar/ firing pin setup

Great cartridge. Very similar to the .280 Rem

Filed up the trigger guard and trigger. Sure makes a difference to add some shape

Filed up the trigger guard and trigger. Sure makes a difference to add some shape

This action is ready to harden the internal components and polish every surface. It cocks, fires, extractor is timed and stout, safety works and it opens and closes like butter. I'll polish it up and get on to the next action. One at a time at this point

This action is ready to harden the internal components and polish every surface. It cocks, fires, extractor is timed and stout, safety works and it opens and closes like butter. I'll polish it up and get on to the next action. One at a time at this point

This action is ready to harden the internal components and polish every surface. It cocks, fires, extractor is timed and stout, safety works and it opens and closes like butter. I'll polish it up and get on to the next action. One at a time at this point

This action is ready to harden the internal components and polish every surface. It cocks, fires, extractor is timed and stout, safety works and it opens and closes like butter. I'll polish it up and get on to the next action. One at a time at this point

This action is ready to harden the internal components and polish every surface. It cocks, fires, extractor is timed and stout, safety works and it opens and closes like butter. I'll polish it up and get on to the next action. One at a time at this point

This action is ready to harden the internal components and polish every surface. It cocks, fires, extractor is timed and stout, safety works and it opens and closes like butter. I'll polish it up and get on to the next action. One at a time at this point

Filed up the trigger guard and trigger. Sure makes a difference to add some shape

7 1/2 lbs. Without the scope it weighed just over 6lbs

7x57R falling block I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

7x57R falling block I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

7x57R falling block I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

7x57R falling block I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

Making more progress on the sidelever actions. Safety is installed and operates smoothly and crisp. It blocks both the sear and trigger.

Making more progress on the sidelever actions. Safety is installed and operates smoothly and crisp. It blocks both the sear and trigger.

Making more progress on the sidelever actions. Safety is installed and operates smoothly and crisp. It blocks both the sear and trigger.

I finished this rifle back in 2010. One of my earlier falling block designs. All of the work was done by me except making the barrel itself.

Thanks Butch. Too kind of you.

I believe that machining double rifle barrels from a solid block would be possible, but you would need the ability to adjust the barrels for regulation, and at that point, I think any benefit of going through that process would be null and void. Proper regulation of a double rifle is measured...

It's striker fired

Shot of few videos filing up one of the sidelevers. This just gets the lever to shape and ready to start polishing.