@Tom Leoni do the 450/400 also have wedge for regulation same as the 375?
Thank you
Thank you
World's most popular community & resource for hunting in Africa since 2007
Chapius Iphisi 375h&h
- Thread starter Chill645
- Start date
juan pablo pozzi
AH veteran
Here a guy sell one in 416rigby by 11000 i have a progress in 470NE and an Agex artisan 416rigby. Im not sure what to do
@Tom Leoni can you explain how the re-regulation works on the X4?
Is it something that an experienced double shooter/loader but novice gun smith could handle?
Ive been interested in purchasing a light 9.3x74r, and the X4 seems to check several boxes.
Thank you,
Is it something that an experienced double shooter/loader but novice gun smith could handle?
Ive been interested in purchasing a light 9.3x74r, and the X4 seems to check several boxes.
Thank you,
- Joined
- Jun 10, 2016
- Messages
- 593
- Reaction score
- 1,416
- Location
- Sweden
- Website
- www.instagram.com
- Media
- 25
- Hunted
- Sweden, Norway, Finland
Tom Leoni
AH fanatic
Here is the translation:
[Left side of page]
Screw 1, screw 2, screw 3.
Regulation of (horizontal) convergence
1: Loosen screw number 1 (key: 1.5mm)
2: Loosen screw number 2 (key: 1.5mm)
3: Work screw number 3 (key: 1.5mm)
- tighten = greater convergence
- loosen = less convergence
(proceed at 1/4 turns maximum each time)
4: Tighten screws numbers 1 and 2 before attempting regulating shot(s)
5: Perform regulating shot(s)
6: If additional regulating is necessary, let barrels cool completely before shooting again (meaning: you can perform steps 1 to 4 even if the barrels are warm, but don't proceed to 5 until they are completely cool)
[Right side of page]
Screws 4, screw 7, screw 6, screw 5
Regulation of (vertical) convergence
1: Loosen the two screws number 4 (key: 0.9mm)
2: Loosen screw number 5 with one turn maximum (key: 2.5mm)
3: Work screw numbers 6 and 7 (key: 1.5mm)
- To lower the point of impact of right barrel (free-floating barrel): tighten first screw number 6, then screw number 7.
- To raise the point of impact of right barrel (free-floating barrel): loosen first screw number 7, then screw number 6.
NB: do not work screws more than 1/4 turn each time
4: Tighten screws number 4 and screw number 5 before attempting regulating shot(s)
5: Perform regulating shot(s)
6: If additional regulating is necessary, let barrels cool completely before shooting again (meaning: you can perform steps 1 to 4 even if the barrels are warm, but don't proceed to 5 until they are completely cool).
I hope this helps. Please let me know if anything is unclear.
Best,
Tom
Thank you @Tom Leoni. Sounds completely doable.
Tiger2001
AH veteran
This is wonderful news and I used to be a Gordy and Sons regular when I lived in TX. BUT am I being unduly nervous about a single point of failure with the ammo? Up until a few years ago, Norma, Kynoch and Hornady made factory 450/500 NE 3" ammunition. Now it's down to just Hornady. If they cease production for find other priorities one has a very expensive display model for their fire place mantle.
F. Vaccaro
AH elite
Handloading removes that fate.
Tiger2001
AH veteran
Yes but many folks do not handled. And also if on a safari it may be too much to expect your PH to have "hand loaded" ammo available should your luggage get delayed/lost. My point being, 14k is a steep investment in a platform that relies on ONE company to produce ammunition for it. But to each his own. I just wish Beretta/Chapuis and chosen 470NE for their next iteration of Iphisi double. Perhaps they will.
Members online
- jrnicho
- Lowballoffersonly
- analog_peninsula
- joker2400
- prdhuntrs
- TTundra
- Hunt anything
- Altitude sickness
- Winmdl71
- jeff
- Atticus
- Campfire
- 45s_Forever
- Hedge774
- Surgeon1
- Tex .416
- TaylorM456
- Beethoven
- wolfhunter
- TOBY458
- eyedok
- Hammergun
- Jim Golden
- Alistair
- Betterinthebush
- A Frame66
- Rumrunner
- Jhsmith
- jpg
- Arac
- JGH
- 458JCE
- bco6
- sgt_zim
- Ontario Hunter
- Aardwolf
- thoma018
- Field28
- TarletonJake
- mitch4570
- Tom Leoni
- Keelebilly
- 318AE
- jruby
- DaddyFlip
- Jeff SN
- 358 Norma
- C Gamboa
- Challer
- TXdawg
Forum statistics
Latest posts
-
150,000 e-Forms to ATF on January 1 - $30 Million In Taxes Saved
- Latest: analog_peninsula
-
-
-
Latest profile posts
Mauser3000 wrote on HBartley's profile.
Hello,
I saw your post selling left hand rifles. Do you have any additional pics of the .416 Rem mag?
Thank you.
-Nathan
I saw your post selling left hand rifles. Do you have any additional pics of the .416 Rem mag?
Thank you.
-Nathan
Mauser3000 wrote on gbflyer's profile.
Hello, I saw your post selling left hand rifles. Do you have any other left hand rifles you may let go of? Also can you send a few additional pics of Borden rifle?
Thank you.
-Nathan
Thank you.
-Nathan