Search results

Pro tip, save the picture to your gallery. Once in your gallery you can search Google for like images. We have technology, use it to your advantage. Someone might have a better way of doing this, it works for me. Has saved my more than once.

2 Billion....

Summer would not be my first choice. 1 heat is bad here like triple digits. 2 snake boots are a must, that much hotter. 3 ticks, they are thick. 4 meat hunt, would not want anything to spoil. These are off the top, want you to know what you are getting into before you get to deep.

Shot placement is key, they do not stay still for long, at least on the hunts we have been apart of.

Prayers sent.

Two we have taken, one was a neck shot with a 6.5CM, the other was a heart shot with a 300WM. Animals have something we cannot measure, that is the will to live. Some are dead, you just have to convince them of it. IMHO a 30-06 with a well constructed bullet will get the job done. Like...

@Red Leg has taken several. He can probably give you some good advice.

I'm doing a lot of offhand shooting with the 22. 100 yards on a 3" round target, ground squirrel targets, 8" at 200 yards. That's about as far as I can get at my place.

Life is a shit sandwich the more bread you make the less shit you taste. - Dad

You can ship primed brass, you CAN NOT ship primers unless you have the hazmat paperwork.

Haha I'm taking it you have never been divorced. It is not a cheap endeavor. A piece of taxidermy is nothing to keep the peace. Besides he will have an excuse to shoot another.

You are basically closing the tip. Good chance that it will not open up. It will change the BC some. I'm sure it will be minimal, when point bullets, we would see 1/2 moa at 1k.

Have dry fired mine 1000s of times. You are not going to hurt it. Their are many things that could have caused this. One is the firing pin getting stuck inside the primer. That is a reason I would not recommend try this. Like @Mark A Ouellette mentioned above. At the .200 line some reamer are...

Not sure about the rifles, that is a fine looking GSP!

You will, the problem is a lot will not feel that way. So the game ranches will go to something else that will make money. The PHs, most will have to find a different line of work. The funds that hunter brought in to protect the animals will go away. The food that the animals provide to the...

I would think not, if the market said you could others would have done it. Now, if you can make powder or primers. Your market would open exponentially. It is obviously not easy or others would have done it by now.

I like AFrames, could not get what I wanted, North Fork had what I needed. So far I'm happy enough with North Fork, I'm not sure I'm going back to AFrames. Dollar votes

You make the time, can only speak for myself. Work 12 hours a day, cook dinner for the family, cut grass/yard work til it gets dark. When all that is caught up spend some time with the family. Head to the gym about late 30 and usually in bed about 0030-0100. Wake up and do it again. hot the...

I'm going to blame a lot of the BS on social media. Not so much this type, the Facebook, IG, TikTok and YouTubes (I'm sure their are others I'm not hip to). People see these extravagant life styles and think it real, it is not. Marriages are broken up all the time, it is just easy/ convenient...

I was going to post that the other day. Thought the same thing, this is what damages perception.

How long would it take to debone a lion? 2 or 3 guys under an hour maybe 2? Would they worry about all the bones or only the high profit? (My guess legs and head I'm not sure) They are not worried about damaging anything. If they kill the pride male, it's a death sentence for all the young...

I'm not pretending to know anything. I'll work off of logic. Logic says, CBL goes away, CBL bone trade goes away. If their is a vacuum, someone is going to fill it. The only way that will happen is wild lion. If I'm off base feel free to correct me. Poachers have no conscience, they care...

I don't agree with this, when the Garmin is used it is not attached to the barrel. You actually measure groups and not worried about if they will fall apart when you remove the MagnetoSpeed. For anyone serious about shooting the Garmin is the way to go IMHO.

Because the Garmin is so easy to use, it will be used more often. Why not you own it, use it. You can learn a lot about your rifle by tracking speeds.

So IMR4895 82gr seems to shoot well with the 450gr. 2338fps avg and stacking up.

Guess I have not experienced this, if that were the normal case. Military surplus ammo would never sell.

Have heard of it. Usually go to my LGS and pay them to ship it for me to avoid the overnight fees.

They do really good work. Have used them several times and never once had a problem.

That sucks, I would think a competent gunsmith with a tig machine could clean this up for you.

Did he weld it?

I did give them thought, it is why they were used. Again everyone has their opinion, I'm not here to change anyone's mind. My only agenda is getting people to think. I'm not forcing my beliefs on to other and talking down to the people who do not agree with my point of view.

So you think the vaccine was pushed/supported by the majority? Do you think abortion is pushed/supported by majority? Do you think BLM is pushed/supported by the majority? Do you think doing away with fossil fuels is pushed/supported by the majority? Look at the hunting licenses sold, the...

Keep reading people say this over and over. If your point was true about the major group of people will decide the future. We'll this would not have happened in the first place. We live in a different world, the power of a few make the law for many. The other side understands how to manipulate...

So....you don't eat fast food? You don't buy your meat at the grocery store? Sorry to break the news, any hunting is seen as a threat to antis. It's like gun control, they will not be happy until guns are completely outlawed. As far as experts go, are these the same experts on global warming...

I have shot ammo older, it is not going to hurt anything. If someone was questioning. Crono the ammo, if the number are close you have your answer. Looking at the boxes, the appearance tells me they have been in a climate controlled environment. I see no reason to worry. My .02

In the past I have used 6mm seating steams to allow for this problem. Hornady does make seating stems for their A tip line of bullets that are very sleek. If you happen to a 6mm seating die you can borrow the stem out of to try. I would start with that, some 7mm stems will work also. The 7mm...

That can be said about many types of hunting. I'm not trying to change your stance, I'm not insane. I do agree, we have to get new people into hunting and shooting. My youngest son (11) has friends that have never shot a gun much less hunted. We usually feel the parents out. If they are...

The sad part is, antis do not care. They are not going to stop til they have all hunting band. Why should they? Think about it, what are they giving up? Answer, Absolutely nothing. So you might view this as a win today. If we don't, good chance our children will not have the same opportunities...

Personally, won't go over 18 inch pounds on rings. You run the risk of deforming the scope tube. Had a long conversation with a well known and trusted individual in the scope business. He told me not to go over 18, have used that from 22lr to 50BMG. Never had a problem.

No one here has a say. We all have our opinions, it is just that opinions. We will see what happens in the long run. Population wise, I'm not sure it will be a benefit. I'm not a scientist, I'm just a guy on the net.

To each their own. Have an AIAX that is a push feed that has over 15k rounds on it, no issues. It is a short action. Had the same configuration in 338LM it had 2k rounds on it when I sold it. Again no issues. Have several R8s more PF, have them in 7PRC, 375h&h, and 458Lott. The 458Lott will...

I'm with @Red Leg believe the kiss method works best.

7PRC 375h&h 458Lott

Demand is low for major manufacturers. If their is enough interest I can have them made. What model box is it?

@rookhawk has really good answers for this subject.

This is a perfect opportunity for someone with a 3D printer to make an insert for that box. If you don't know anyone with a printer hit me up. I have a guy that can get that knocked out for you pretty easily. You will probably want them bullet down. The rim will leave a lot of slack at the top...

@ActionBob

I hate it, that's why I'll put a can on everything I can.

If you did it as an individual it will happen fairly fast. Some people have received approval in 24hr. Average is less than a month. I you have a standardized trust it is taking longer. They need to go through all the language and confirm. More than one person add additional time. If you have...

It is not negative. That is they only way to ensure you have the supplies required to continue progress (training and hunting). If someone was trying to make a profit on it...well that is a little different issue. Not against the law.